Added Equipment

Engine and Genset Info

Yanmar 4JH4E 56HP

idle spec 800-850 rpm
typical warmed up engine temp <80C
fuel consumption ~ 1.2 gal/hour @ 2400 rpm
Yanmar part numbers:
- heat exchange o-rings: 129 670 44150
- heat exchange gaskets: 120 322 33050
- mixingelbow gasket: 370 129472 18090
- oil filter 129250-35151
engine coolant: 6 quarts for engine + 1 quart for hot water heater heat exchange loop
add 1/10 quart of Killem to full fuel tank each season
engine hours
- 195 hours on 6/15/06
- 358 hours on 9/10/06
- 536 hours on 8/7/07
- 560 hours on 9/21/07
- 582 hours on 5/25/08
- 782 hours on 10/5/08

800 508 6494
Oil filter kubota 15853-32430
water pump: Johnson pumps - US rep: DEPCO Clearwater L 1 800 446 1656
- pump: F 4B 9 10-35127-3 0426
- gasket: 01-45284
- screws 05-04-642
OIl SAE 30 Yanmar Marine Diesel heavy duty (check with manual; also used 15W-40)
genset hours
- 23.4 on 5/29/06
- 68.6 on 10/10/07